RCA Male to BNC Female Connector. This 75 ohm connector plugs into any standard RCA female jack and allows you to connect a standard BNC Male cable to it.
Flashbus Spectrim LiteHigh-speed,
very low-cost,PCI bus-mastering frame grabber
designed to capture 8 bits-per-pixel monochrome
and 24 bits-per-pixel color video in real
time to system memory,
for use with PTZ camreas.
Audio/Video Capture Board
- Studio-Quality. Digital Performance. High-performance,
digital video capture card designed to deliver
the best quality video experience,
for use with PTZ camreas.
Inconspicuous dome housings specifically
designed to accommodate the EVI-D70 and EVI-D70/W
cameras offer versatility, easy installation and
outstanding camera protection in a compact size.
Inconspicuous dome housings specifically
designed to accommodate the EVI-D70 and EVI-D70/W
cameras offer versatility, easy installation and
outstanding camera protection in a compact size.
IP
Network Ready 7" Vandal-Resistant Outdoor
dome housing w/wall mount, rugged cast aluminum
top and polycarbonate clear dome, w/24 vac
input, heater/blower, for an IP Network
PTZ camera, 120 to 24 vac transformer
IP
Network Ready 7" Outdoor dome housing
w/wall mount, clear dome, w/24 vac input,
heater/blower, for an IP Network PTZ camera,
120 to 24 vac transformer
IP
Network Ready 7" Outdoor dome housing
w/wall mount, tinted dome, w/24 vac input,
heater/blower, for an IP Network PTZ camera,
120 to 24 vac transformer.
IP
Network Ready 7" Vandal-Resistant Indoor
Recessed dome hsg, w/recessed ceiling mount,
tinted dome, for an IP Network PTZ camera,
Indoor Model - No electronics
IP
Network Ready 7" Vandal-Resistant Outdoor
dome housing w/pendant mount, rugged cast
aluminum top and polycarbonate clear dome,
w/24 vac input, heater/blower, for an IP
Network PTZ camera, 120 to 24 vac transformer
Wall Mount for Sony EVI-HD1, will mount over standard single gang electrical box or directly to the wall.
$148.00
CM-1200B-18
Camera mount allows a Sony EVI-HD1HD Camera to be horizontally mounted from the suspended ceiling grid. Includes top plate assembly system, camera pod, and 18” tube.
Wall Mount allows camera to be mounted directly over a double gang electrical box. Includes custom plate design for SonyEVI-HD1 High Definition PTZ Camera.
$185.00
WM-BRC-B
Wall Mount System for Sony BRC-300, BRC-Z700 and BRC-H700 3 CCD PTZ Cameras
$155.00
CM-1000B-18
Camera Mount allows a Sony BRC-300 , BRC-Z700 to be horizontally mounted from the suspended ceiling grid. Includes top plate assembly system, camera pod, and 18” tube.
General Purpose Camera Interface Kit - Wall Mount, Regulated Camera power, remote control and S-video are carried on a single standard CAT5 UTP wire for distances up to 300’
