| Input
video formats |
NTSC,
PAL, SECAM, S-video |
| Input
video |
1V
peak to peak, 75ohms |
| Resolution |
NTSC:
640 x 480; PAL/SECAM: 768 x 576 |
| Sampling
jitter |
Maximum
of ± 4ns relative to horizontal synchronization
(for a stable source) |
| Output
formats |
Color:
YCrCb 4:2:2 and 4:1:1; RGB 32, 24, 16, 15;
Monochrome: Y8 |
| External
trigger |
Input
pulled by 10k ohms to 5V, trigger requires
a TTL pulse of 100 ns (minimum); software
programmable edge or level sensitivity; software
programmable polarity |
| ESD
protection |
All
inputs and outputs are diode protected |
| Form
factor |
PCI
short card, 174.6 x 106.7 mm (6.875 x 4.2
inches) |
| Video
noise |
²
1 LSB (least significant bit) |
| Camera
power |
+
12 VDC output |
| Video
multiplexer |
Standard
board: four video inputs (only one can be
S-video); Optional Control Package: four video
inputs, any or all of which can be S-video |
| Power
requirements |
+
5 VDC, 500 mA |
| Operating
temperature |
0°
C to 60° C |
| Warranty |
One
year limited parts and labor |
| Video
expanded to 4 S-video inputs |
| Independent
DC restore on four video inputs |
| Fast
field detect for unsynchronized sources |
| Four
TTL inputs, four TTL outputs |
| Horizontal
and vertical drive outputs |
Inputs
and outputs can be configured as triggers
and strobes
– Programmable
trigger edges, debounce
–
Programmable strobe durations, polarity
– Video synchronized
strobes programmable to any line
–
Programmable association between triggers/strobes/grabs/video
channel |
| Strobes
can be inhibited during CCD transfer time
(programmable inhibit zone) |
